Vertical Water Source Heat Pump
Back to Vertical Water Source Heat PumpBackVertical Water Source Heat Pump inventory
WSV Series
Products in this series: WSV6 (Up to 6 Tons) • WSV6 (7.5 – 10 Tons) • WSS6 Slim 16 • WSVC/X • DDC Controller (WSV)
- 3/4 through 10 Tons
- Digital Control Module (DCM)
- Multi-Speed Blower Motor
- Vertical Water Source Heat Pump
- DDC Controller Option
- The WSV Series is our vertical water source heat pump line for closet and mechanical-room installation, covering 3/4 through 10 tons on R-454B refrigerant.
- The series includes the WSVC/X at 3/4 through 5 tons, the WSV6 up to 6 tons, the WSV6 in 7.5 and 10 ton sizes, and the WSS6 Slim 16 at 3/4 through 2.5 tons with the smallest footprint in its class.
- Units ship with the standard Digital Control Module (DCM). A DDC Controller option is available where the unit has to report to a building automation system; it is the same equipment with a different control package.
- Transformer sizing varies by model: 50 VA on WSVC/X and WSV6 through the 6 ton sizes, 75 VA on WSV6090 and above.

Standard Features
- Runs environmentally friendly R-454B refrigerant
- Multi-speed blower motor
- Air-handling section lined with 1" fiberglass insulation for quiet, efficient operation
- Non-corrosive condensate pan, sloped for positive drainage
- Standard filter rack accepts 1" or 2" filters (optional 4" rack available)
- 100% factory run-tested prior to shipment
Downloads
Models
5
WSV6 (Up to 6 Tons)
The WSV6 (Up to 6 Tons) is a vertical water source heat pump from First Co. covering nominal capacities of 3/4 through 6 tons (models WSV6009-WSV6072). It uses environmentally friendly R-454B refrigerant, a multi-speed ECM blower motor, and a Digital Control Module (DCM), with a 50 VA transformer on the 3/4-6 ton (WSV672) models. Water, refrigerant, and electrical connections are accessible from the front service access panel.
View→
WSV6 (7.5 – 10 Tons)
The WSV6 (7.5 – 10 Tons) is a vertical water source heat pump in First Co.'s WSV Series, available in 7.5-ton (WSV6090) and 10-ton (WSV6120) sizes using environmentally friendly R-454B refrigerant. It features a high-efficiency scroll compressor, a Digital Control Module, and either a forward-curve direct-drive fan with ECM motor or a belt-driven forward-curve fan with premium-duty motor, configurable in left/right return with top or side supply arrangements.
View→
WSS6 Slim 16
The WSS6 Slim 16 (HydroTech) is a First Co. water source heat pump rated from 3/4 through 2.5 tons with up to 16 EER, using R-454B refrigerant. It features the smallest footprint in its class, a slide-out refrigeration section, and a state-of-the-art electronic control module with diagnostic sight glass.
View→
WSVC/X
The WSV Series vertical water source heat pump offers cooling capacities from 0.75 to 5 tons using environmentally friendly R-454B refrigerant. Available in both WSVC and WSVX configurations with PSC and ECM motor options.
View→
DDC Controller (WSV)
The DDC Controller option equips the WSV Series vertical water source heat pump with a direct digital control board in place of the standard Digital Control Module (DCM), so the unit can be commanded and monitored by a building automation system.
View→